WELCOME TO HAMBUILDER INDONESIA
Dear Hambuilder Valued Customer,
Especially those in Great Britain / UK & Brazil,
we would like to announce that the regulations of the
UNIVERSAL POSTAL UNION (UPU) :
Especially for shipments to Great Britain / United Kingdom (EORI)
& Brazil (CPF), it is required to include an EORI
(economic operator registration identification) Number.
If the recipient does not have an EORI number then they can register
to get it via www.gov.uk/eori, it will take about 3-5 working days to make EORI.
Any shipment that is not accompanied by the recipient’s EORI
cannot be further processed.
HBR4HFX , is another 4-banders series with high power out from Hambuilder. It is a small size desktop transceiver with big power. We try to keep it low cost, simple to operate and easy to maintain. You can also adjust the power out down to QRP level (below 10W).
Frequency Coverage (programmable) :
*. 80m (3.500.000 – 3.999.990)
*. 40m (6.900.000 – 7.499.990)
*. 30m (10.100.000 – 11.449.990)
*. 20m (14.000.000 – 14.349.990)
*. Tunning step : 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz (rotary dial push)
*. Display : 2.2 Inch 320×240 pixel TFT
*. Dimension : 60mm (Height) x 220mm (wide) x 130mm (deep)
*. Controller : ATMega128
*. Main mixer : ADE-1 mixer
*. IF Frequency : 11.059200 MHz
*. Synthesizer : Si5351
*. Selectivity : 4 pole crystal ladder filter (3Khz nominal bandwidth)
*. Power out : at 13.8V 100W at 80m, 80W at 40m, 60W at 30m, 25W at 20m
*. Adjustable RX gain setting with MMIC front end amplifier up to 0.1uV sensitivity
*. Adjustable TX gain setting (adjustable power out 0-100W)
*. Adjustable AF gain setting
*. Adjustable Mic gain setting
*. 2 x IRFP150 final transistor
*. Morse generator, (tone modulated mic)
*. CW sharing filter with SSB
*. Iambic keyer or straight key (set 0 WPM) option setting
*. PSU Voltage 13.8 V (12-13.8 V)
*. RX current consumption : 380 – 385 mA (Vcc 13.8 V)
*. TX current consumption : 80m 15 A, 40m 15 A, 30m 13A, 20m 10 A (Vcc 13.8 V)
*. 2 Watt, Speaker out
*. 6 functional button
Package you will get:
*. HBR4HFX unit with fully assembled and ready to use (1)
*. DC chord (1)
*. Condenser Microphone (1)
- ** Shipped assembled, pre-programmed, fully tested, and in working properly.
- ** Purchasing this Product means being prepared to comply with the applicable requirements & policies.
- ** This is a home-brew Product and is designated for personal use only.
- ** Adequate knowledge in radio electronics is required in using this Product.
- ** Hambuilder is not liable for any damage or error caused by user’s failed experiments and/or learning process.
- ** Our workshop is in Indonesia, sending packages using ePacket from Indonesian post and the delivery time around 15-20days.
To contact our team via message inbox or via email to support @hambuilder.com
About Feedback :
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase. These original Hambuilder products are made in Indonesia.
2. If the product is defective or damaged upon arrival or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by the buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Positive Feedback, and will do the same in return. DO NOT leave negative feedback without first communicating with us. Please allow max 2 business days for us to respond.