HBR4HF Quad Band HF Transceiver (80m, 40m, 30m, 20m)


Out of stock

Categories: ,




HBR4HF V3.0, is another 4-banders series from Hambuilder. It is a medium size desktop transceiver with big enough power. We try to keep it low cost, simple to operate and easy to maintain. You can adjust the power out down to QRP level (below 10W).


Frequency Coverage (programmable) :
*. 80m (3.500.000 – 3.999.990)
*. 40m (6.900.000 – 7.499.990)
*. 30m (10.100.000 – 11.449.990)
*. 20m (14.000.000 – 14.349.990)

*. Tunning step : 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz (rotary dial push)

*.  Display : 2.2 Inch 320×240 pixel TFT
*. Dimension : 60mm (Height) x 170mm (Width) x 220mm (Lenght)

*. Controller : ATMega128
*. Main mixer : ADE-1 mixer
*. IF Frequency : 11.059200 MHz
*. Synthesizer : Si5351
*. Selectivity : 4 pole crystal ladder filter (3Khz nominal bandwidth)
*. Power out : at 13.8V 25W at 80m, 20W at 40m, 15W at 30m, 15W at 20m
*. Adjustable RX gain setting with MMIC front end amplifier up to 0.1uV sensitivity
*. Adjustable TX gain setting (adjustable power out 0-25W)
*. Adjustable AF gain setting
*. Adjustable Mic gain setting
*. 2 x IRF530 final transistor
*. Morse generator, (tone modulated mic)
*. CW sharing filter with SSB
*. PSU Voltage 13.8 V (12-13.8 V)
*. RX current consumption : 380 – 385 mA (Vcc 13.8 V)
*. TX current consumption : 80m 6 A, 40m 4.5 A, 30m 4 A, 20m 4 A (Vcc 13.8 V)
*. 2 Watt, Speaker out
*. 6 functional button

Package you will get:
*. HBR4HF unit with fully assembled and ready to use (1)
*. DC chord (1)
*. Condenser Microphone (1)

** For manual of HBR4HF V3.0 check the following link : https://drive.google.com/drive/u/1/folders/1RoexpEvkThPCOhJVJfTu3B46QBXe7BnE


  • ** Shipped assembled, pre-programmed, fully tested, and in working properly.
  • ** Purchasing this Product means being prepared to comply with the applicable requirements & policies.
  • ** This is a home-brew Product and is designated for personal use only.
  • ** Adequate knowledge in radio electronics is required in using this Product.
  • ** Hambuilder is not liable for any damage or error caused by user’s failed experiments and/or learning process.
  • ** Our workshop is in Indonesia, handling time for our order processing and testing takes 15 working days.
    Sending packages using ePacket from Indonesian post and the delivery time around 7-10 days. If you cannot accept this condition please do not buy this product
    To contact our team via message inbox or via email to : support@ hambuilder.com


About Feedback :

1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase. These original Hambuilder products are made in Indonesia.

2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.

3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.

4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.

Best Regards,

Hambuilder Team

Additional information

Weight 1500 g


  1. Craig B

    All in all I would give this radio two thumbs up. There were a few stripped case screws when the radio was taken out of the box, I ended up having to replace 3 of them as they would rattle when people would talk. After using the radio for a few hours, the rx is quite sensitive and the audio is very pleasurable to listen to. I’ve gotten positive reviews on the audio quality on the tx side as well.

  2. Neil Tolman

    Very pleased with the quality of workmanship on my HBR4HF V3.0 . Reception is clean and easy to tune. Signal reports at 80m at 20 watts so far are more than acceptable. This radio is a joy to operate as it is a no frills basic radio which is exactly what I was looking for. K1NBT

Add a review

Your email address will not be published.