Description

This low cost version transceiver controller designed for minimalist or simple mono-bander transceiver. We just have to connect the jumper pin to do calibration setting, if setting and BFO setting (if we used the BFO out) then, connect one or two frequency out to the exciter

Specification:
*. 8 Digit 7 segment
*. ATMega16 controller
*. Si5351 synthesizer (VFO & BFO)
*. VFO frequency out (0.1 – 99 Mhz) seven segment digit limitation, not the chips
*. Adjustable IF/BFO frequency setting
*. Optional to turn off BFO
*. USB-LSB-AM mode control pin out.
*. 2 push button (mode and setting)
*. 1 ADC input 0-2.56V for s-meter
*. 1 DI/O for RX/TX
*. 3 DI/O for mode (USB/LSB/AM) out control
*. 7 LED Smeter indicator

Package :
* RTC07S Controller complete & assembled